New Icom Ic-r6-20 Ipx2 Mil-std-810 Exp Wide Band Handheld Scanner Receiver Radio

NEW ICOM IC-R6-20 IPX2 MIL-STD-810 EXP Wide Band Handheld Scanner Receiver Radio
NEW ICOM IC-R6-20 IPX2 MIL-STD-810 EXP Wide Band Handheld Scanner Receiver Radio


NEW ICOM IC-R6-20 IPX2 MIL-STD-810 EXP Wide Band Handheld Scanner Receiver Radio


NEW ICOM IC-R6-20 IPX2 MIL-STD-810 EXP Wide Band Handheld Scanner Receiver Radio

NEW ICOM IC-R6-20 IPX2 MIL-STD-810 EXP Wide Band Handheld Scanner Receiver Radio

NEW ICOM IC-R6-20 IPX2 MIL-STD-810 EXP Wide Band Handheld Scanner Receiver Radio



NEW ICOM IC-R6-20 IPX2 MIL-STD-810 EXP Wide Band Handheld Scanner Receiver Radio


NEW ICOM IC-R6-20 IPX2 MIL-STD-810 EXP Wide Band Handheld Scanner Receiver Radio

NEW ICOM IC-R6-20 IPX2 MIL-STD-810 EXP Wide Band Handheld Scanner Receiver Radio

NEW ICOM IC-R6-20 IPX2 MIL-STD-810 EXP Wide Band Handheld Scanner Receiver Radio



NEW ICOM IC-R6-20 IPX2 MIL-STD-810 EXP Wide Band Handheld Scanner Receiver Radio  
NEW ICOM IC-R6-20 IPX2 MIL-STD-810 EXP Wide Band Handheld Scanner Receiver Radio

ICOM IC-R6 -20 IPX2 Drip water resistant EXP Handheld Wideband Receiver. Product code: ICOM IC-R6 The R6 comes with.
IC-R6 EXP Handhled Govt wideband receiver(Analog mode). AA size Rechargeable battery and 120V AC adapter US plug(Please note you might find other converter adapter if you live in other voltage areas and you can use other AA charger to charge the battery).

English Owner's Operation Manual. The 100 Ch/Sec Wideband Signal "Search Machine". While the IC-R6 receives an ultra wideband frequency range, the radio provides superior sensitivity and receiver characteristics that is insusceptible to interference.

Frequency range depends on version. Cannot decode digital TV audio.

100 channels per second high speed scan. The IC-R6 has 100 channels per second high speed scan capability. This superior scanning power allows the utmost efficiency when searching over 1300MHz of spectrum! 15 hours of continuous receive capability. The IC-R6 is energy-efficient, designed to provide many hours of listening enjoyment on a single charge. With the supplied rechargeable Ni-MH cells (1400mAh ×2), the IC-R6 provides up to 15 hours of continuous receive capability.

At 50mW output using external speaker. 1300 memory channels with 22 memory banks. With 1300 alphanumeric memory channels, 50 scan edges and 200 auto write memories, the IC-R6 gives you flexible scanning.

Use the bank link scan feature to choose from and connect any of the 22 memory banks. The VSC opens the squelch only when a modulated signal is detected and ignores unmodulated beat noise. It is a handy feature for those listeners who are scanning for talk, news and music, but not data bursts or beacons. The IC-R6 can be powered by rechargeable Ni-MH cells, or with alkaline batteries. Run the IC-R6 using the AC adapter, or opt for a cigarette lighter cable, CP-18A/E.

When used the optional drop-in charger stand BC-194 with the AC adapter or cigarette lighter cable, you can easily start charging the Ni-MH cells, while eliminating the need to connect the power source to the DC power jack of the receiver. Built-in audio low pass filter.

±1.0ppm high frequency stability (at 25°C). 150mW loud audio with internal speaker. DTCS and CTCSS tone squelch and reverse tone squelch. Priority watch function with priority beep function. Optional CT-17, CI-V level converter for remote control.

PC programmable with optional CS-R6. Receiver-to-receiver cloning (optional OPC-474 required). Auto power OFF (0.5-2 hours and end of busy signal). Auto memory write scan stores the detected frequency, mode and tone into a specified memory. Reversible up/down buttons and dial knob for volume, frequency, memory channel, scan direction and set mode settings.

Optional new tube earphone, SP-27. Frequency coverage (Differs according to version). Rated audio output: 130mA typ. 2×R6 (AA) size Ni-MH or alkaline cells. 4.5V DC rated (4.5 - 6.3V with BC- 196SA/SD, CP-18A/E).

1250 (including 200 auto memory write and 50 scan edges). Dimensions (W×H×D; Projections are not included). 58×86×29.8 mm; 2.28×3.39×1.17 in. Sensitivity (typical, except spurious points). FM (at 12dB SINAD): 1.625MHz- 4.995MHz 0.32µV typ.

5.000MHz- 29.995MHz 0.25µV typ. 30.000MHz- 117.995MHz 0.18µV typ.

118.000MHz- 246.995MHz 0.18µV typ. 247.000MHz- 469.995MHz 0.18µV typ. 470.000MHz- 832.995MHz 0.32µV typ. 833.000MHz-1029.995MHz 0.28µV typ. 1030.000MHz-1309.995MHz 0.35µV typ. WFM (at 12dB SINAD): 76.000MHz- 108.000MHz 1.1µV typ. 175.000MHz- 221.995MHz 1.1µV typ. 470.000MHz- 770.000MHz 1.8µV typ. 5.000MHz- 29.995MHz 0.89µV typ.


118.000MHz- 136.000MHz 0.63µV typ. 222.000MHz- 246.995MHz 0.63µV typ. 247.000MHz- 329.995MHz 0.79µV typ.

AF power (at 10% distortion). Internal speaker (16O load) More than 150mW External speaker (8O load) 80mW typ. 3-conductor 3.5 (d) mm.

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards. Also meets equivalent MIL-STD-810 -C, -D and -E. All stated specifications are subject to change without notice or obligation. The item "NEW ICOM IC-R6-20 IPX2 MIL-STD-810 EXP Wide Band Handheld Scanner Receiver Radio" is in sale since Wednesday, February 19, 2014. This item is in the category "Consumer Electronics\Radio Communication\Ham, Amateur Radio\Ham Radio Receivers". The seller is "palacemuseum" and is located in Taipei Taiwan. This item can be shipped worldwide.

  • Type: Portable/Handheld
  • Brand: Icom
  • Model: ICR6
  • MPN: IC-R6-20
  • Frequency Band(s): HF
  • Supported Modes: AM
  • Country/Region of Manufacture: Japan
  • To Fit: Portable/Handheld Radio
  • UPC: 731797007858


NEW ICOM IC-R6-20 IPX2 MIL-STD-810 EXP Wide Band Handheld Scanner Receiver Radio  
NEW ICOM IC-R6-20 IPX2 MIL-STD-810 EXP Wide Band Handheld Scanner Receiver Radio